The post 💡 Twinkle Tips Friday: 💫 Symmetrize 🔄 Your Mega Tree 🌲 Star ⭐ Sub-Models appeared first on Pixel Pro Displays LLC.

The post Layout Creation Part 8: UPDATED for 2021 Stars and Wreaths appeared first on Pixel Pro Displays LLC.

LEARN HOW TO BUILD SOME PRETTY COOL STARS AND WREATHS. AS WELL AS PRO TIPS ON HOW YOU CAN EASILY ADD THEM INTO YOUR XLIGHTS LAYOUT SCREEN

If you have been following our series closely, then you’d probably immediately noticed that we have touched on this topic before. However, we have included this video to serve as a recap and even more! Particularly because we wanted it to fall in line with the layout creation series. So we have redone it and even included some additional information that you may not have seen in the past.

In this video, you will learn professional tips and tricks about how you can build wreaths, stars, and concentric in xLight -- both clockwise and counterclockwise; the number of rings or pixels notwithstanding.

You are gonna learn lots of practical setup tips on how you can set up your props for any occasion. Enjoy!

The post Layout Creation Part 8: Stars and Wreaths appeared first on Pixel Pro Displays LLC.

Just finished the Prototype coro star. I Plan on making 19 more for the 2015 display.

The post RGB Coro Star 2015 appeared first on Pixel Pro Displays LLC.

***Update Spring 2015...
These have been disassembled and rebuilt using RGB bullet pixel nodes. See new video here:

http://www.youtube.com/watch?v=TCrtGR...

Using 1/2" PVC cut to 22" and connecting 2 "T" connectors together with a bolt, I made the spinner. Each leg on the spinner has 5 pixels (RGB Pixel strips), with a total of 40 pixels. This was the prototype and took about 5 hours to build. The next one will be much easier now that I have it all written out and measured. These spinner legs store (collapsed) in an 18 gallon tote.

The post Pixel Spinner/Star Test appeared first on Pixel Pro Displays LLC.

New for 2014 is an RGB pixel star line. Using some stars purchased from Ray Wu on Aliexpres. There will be 20 stars to hang from the peak of the house to the corners of the lower roof. Items needed for construction were the stars, male and female 3-core connectors, 20 count of 3-rgb pixel modules, hot glue, heat shrink, soldering iron and solder, heat gun, and wire cutters/strippers.

The post Custom Built RGB Star Line appeared first on Pixel Pro Displays LLC.

Just finished the Prototype coro star. I Plan on making 19 more for the 2015 display.

The post RBG Coro Star 2015 appeared first on Pixel Pro Displays LLC.