This video shows how I converted some free computer power supplies that were salvaged from St Sebastian Catholic School in Belle Vernon, PA In 2013, I converted my light display over to RGB low voltage LED lighting. There is a… Read More
GE Color Effects (GECE) Pixel Spinner How-To Build
Building a GE Color Effects Pixel spinner using PVC pipe. Total of 64 pixels make up this spinner. So far I’m pretty happy with the results. At the end of the video is a demo with music to show how… Read More
Building a 27 channel RGB Controller
I have assembeled 7 of these controllers already. This controller is different due to the use of a converted computer power supply. The form factor is much larger than a commercially specific power supply that sits much more flat. In… Read More
Setting Up E1.31 on Windows 7 (Part 4 DMX Controller Setup)
This final video is dedicated to setting up the “EASY DMX” controller boards used in RGB displays. The video demonstrates how all the components connect together. Following the instructional section is a demonstration of the entire setup running a sample… Read More
Setting Up E1.31 on Windows 7 (Part 3B E682 to DMX)
This is the 3rd video in the series. The video is broken down into 2 parts (due to length). This video gets you connected to the E682 web setup page. From this page you can setup the E682 to output… Read More
Setting Up E1.31 on Windows 7 (Part 3A E682 to DMX)
This is the 3rd video in the series. The video is broken down into 2 parts (due to length). This video gets you connected to the E682 web setup page. From this page you can setup the board to output… Read More
Setting Up E1.31 on Windows 7 (Part 2 LOR and E1.31 Output)
Part 2 of this series shows how to configure LOR . We go through network settings in the S3 software as well as configuring the universes . We also discuss a bit of Multicast vs Unicast. Finally there is a… Read More
Setting Up E1.31 on Windows 7 (Part 1 Network Settings)
This is a 4 part video series on how to setup your Light O Rama computer to output E1.31 protocol. E1.31 allows data to be sent from the sequence to the controllers.
Intro to RGB: Basic Connection of RGB to DMX Controller
This video is a basic setup of and operation of 3 channel RGB controller to a DC power supply.
Connecting RJ45 network cable to 27 channel DMX controller
I have updated this video with a step-by-step version as I made one for 2014 https://www.youtube.com/watch?v=xtsbz… This is how I connected my 2 female jacks to the 27 channel DMX RGB controller board. I like the idea of an input… Read More